High Explosive & Dem Stores

British military use our APBT to clear obstacles that impede or stop advancement.

The APBT incorporates a unique and patented design-feature, enhancing its cutting capability.

Specially formulated insensitive explosive composition (DPX9) and can be configured into charges specific to the target by cutting to shape, rolling or moulding into geometric shapes.

Advanced formulation plastic explosive used in military and commercial demolition operations. Mouldable by hand to form demolition charges of various shapes and weights.

Filled with 12kg of PE8 Plastic Explosive prior to deployment. Produces a hole in a wide range of target materials (e.g. concrete, steel, soil).

Filled with 8kg of PE8 Plastic Explosive prior to deployment. It is intended to produce a linear cut in a wide range of target materials (e.g. concrete, steel etc)

Supplied in full military pack it provides a means of ignition from an electrically ignited fusehead to a pyrotechnic fuse of specific diameter.

The L1A2 detonator comprises of an aluminium tube with an output charge of PETN initiated with a primary charge of Aluminium/ Lead Styphnate/ Lead Azide. Supplied in full military pack

The L2A2 detonator comprises of an aluminium tube with an output charge of PETN initiated with a primary charge of Aluminium/ Lead Styphnate/ Lead Azide.  Supplied in full military pack

The L2A2 detonator comprises of an aluminium tube with an output charge of PETN initiated with a primary charge of Aluminium/ Lead Styphnate/ Lead Azide. Supplied in full military pack

Used for transmitting a detonation wave from an initiation device to a charge and between subsequent charges. 10g/m is supplied on 70m reels and 20g/m is supplied on 50m reels.

Used in demolitions where timed detonations are desirable or to provide a delay for users to retire to a place of safety.  Burns at 131 +/- 13 seconds per metre allowing users to accurately calculate the length of safety fuze required to provide the desired delay.